- 35° Locking vertical and 368° locking horizontal adjustment
3.5" MX MR16 Square Adjustable
Inside the MX MR16 Square Adjustable’s 3.5” small aperture, shallow housing form factor resides a dynamic, cost effective solution to a variety of commercial, institutional, hospitality, residential, and retail lighting needs. Capable of accepting a variety of LED MR16 lamps, including GU10 and GU5.3, the MX MR16 Square Adjustable is ready for a range of filter media as well. Additional options include trimless, round, pinhole, Non-IC, Air-Tight IC, and CCEA (Chicago Plenum). Building on the standard MX MR16 Downlight, the MX MR16 Square Adjustable allows for the aiming of light across 35° vertical tilt and 368° horizontal rotation.
lamp (ordered separately)
- 12V MR16 GU5.3 LED 15W max.
- 12V MR16 GU5.3 Halogen 35W max.
- 120V MR16 GU10 Halogen 35W max.
- Power factor >.9, 50/60Hz
- Multiple electronic transformers available, dimming on 120V only
- This product complies with IEEE C62.41 for surge endurance up to 2.5KV. Additional surge protection recommended. Damage from power surge is not covered by warranty.
- NT - GU10 without transformer with 120V input (35W max.)
- T1 - Hatch RS12-15(X)-LED 120V input/12V output 15W max., no minimum load
- T2 - Hatch RS12-60(X) 120V input/12V output 35W max., no minimum load
- T3 - Hatch RS12-80-277(X) 277V input/12V output 35W max., minimum load 10W (not recommended for LED)
Heavy duty black powder coated 18 gauge steel frame. Standard plaster frame accommodates 5/8” ceiling thickness, consult factory for thicker ceilings.
Housing types include IC Air-Tight, CCEA (Chicago Plenum), or Non-IC Rated (must specify). Non-IC rated housings must be kept at a minimum of 3” away from insulation. Butterfly brackets and adjustable hanger bars (14”-25”) with integral nail included. Butterfly brackets are compatible with C-channel, flat bar hanger and EMT. C-channel is recommended for T-bar ceilings. Bar hangers must be ordered separately.
Available in adjustable or pinhole. High quality trims are die-cast using A380 aluminum and finished with durable powder coat.
Luminaire will accommodate a maximum of (2) accessories, accessory holder required.
- ETL listed to US and Canadian standards for damp locations
- (-IC Only) Air Tight Certified ASTM E283
- (-IC Only) ETL listed for direct contact w/insulation
- (-CP Only) CCEA Chicago Plenum